Install a Freestanding Triple Monitor Stand for 22-32" Displays

Quick answer

Assemble the base, attach the vertical post, mount the crossbar, then attach each monitor arm. Level and tighten all bolts before connecting your displays.

Installation steps

1. 1. Assemble the base: Attach the four base legs to the central hub using the provided bolts. Tighten evenly with the included Allen wrench. Common mistake: Overtightening one leg before the others can warp the base. Tighten in a star pattern.
2. 2. Install the vertical post: Slide the main vertical tube into the base hub and secure it with the locking collar. Ensure it sits flush. Checkpoint: The collar must be fully engaged; a loose post will cause monitor sag.
3. 3. Attach the crossbar assembly: With a helper, lift the crossbar onto the vertical post. Align the mounting bracket and tighten the clamp bolts. Common mistake: Forgetting to level the crossbar before tightening can cause uneven monitor heights.
4. 4. Mount the monitor arms: Slide each VESA plate arm onto the crossbar in the desired position. Tighten the set screws to prevent sliding. Checkpoint: Leave the arms slightly loose until all three are positioned; then final-tighten.
5. 5. Attach monitors and adjust: Hang each monitor on its VESA plate and secure with the thumb screws. Adjust tilt, swivel, and height for a seamless curve. Common mistake: Mounting monitors before tightening the arm clamps can cause the crossbar to shift under load.

Product details

• Freestanding Triple (3) Monitor Stand – 22" to 32" Displays for Sim Racing, Flight Simulation & Truck Simulators: 2-inch steel tube construction supports 22–32 inch displays and can be upgraded to a quad setup. The steel frame provides a rigid foundation for three monitors, reducing wobble during intense sim racing or flight sessions.