Why Upgrade a Dual Monitor Stand to Triple?
A triple monitor setup is a common goal for sim racers and flight sim enthusiasts who want a wider field of view without cockpit bezels breaking the immersion. If you already own the Trak Racer Freestanding Dual (2) Monitor Stand, Upgradeable to Triple – Supports Displays up to 45", you can expand rather than replace your stand. This guide explains what the upgrade involves, what displays work, and what to check before ordering side arms.
What the Base Stand Offers
- Freestanding Dual (2) Monitor Stand, Upgradeable to Triple – Supports Displays up to 45": Built with 2" steel tube construction, this freestanding dual monitor stand supports a primary display up to 80" and a secondary display up to 45". The heavy-duty steel frame provides a stable foundation for adding a third monitor, and the 45" secondary limit gives you a clear size ceiling for side displays.

Freestanding Dual (2) Monitor Stand, Upgradeable to Triple – Supports Displays up to 45" - Freestanding Dual (2) Monitor Stand, Upgradeable to Triple – Supports Displays up to 45": The stand supports VESA patterns from 75mm to 400mm, making it compatible with most monitors and TVs. When choosing a third monitor, check that its VESA pattern falls within this range so it can mount on the optional side arm.
- Freestanding Dual (2) Monitor Stand, Upgradeable to Triple – Supports Displays up to 45": The stand is designed for future expansion: you can add optional side arms to convert to a triple monitor setup. This confirms that the upgrade path is intentional, not an afterthought. You don't need to buy a new stand to go from dual to triple.
What the Upgrade Involves
The Trak Racer dual stand is designed to accept side arms that turn it into a triple monitor stand. The base unit remains the same; you add one or two arms depending on your layout. The supplied information does not detail the exact arm model or installation steps, so you should contact Trak Racer or check your product documentation for compatible side arms and hardware.
Because the stand is freestanding, adding a third monitor does not affect your cockpit or rig. You can position the screens independently for the best field of view without transferring vibration from your sim rig.
Key Considerations Before You Upgrade
- Display size and weight: The secondary display limit is 45". If you plan to add a third monitor of similar size, stay within that limit. The supplied information does not specify a maximum weight per arm, so verify with Trak Racer if your monitors are heavy.
- VESA compatibility: Your third monitor must have a VESA pattern between 75mm and 400mm. Most modern monitors in the 24"–45" range support this, but always confirm before purchasing.
- Rig compatibility: The stand is compatible with a wide range of sim racing rigs and flight cockpits, including Trak Racer tube frames (FS3, RS6, TR8 PRO, TRX, etc.) and extrusion frames (TR200, TRA, TR160, etc.). If your rig isn't listed, contact Trak Racer to confirm fit.
- Space and layout: A triple monitor setup requires more desk or floor space. The freestanding stand lets you adjust width and monitor positioning, but measure your available area to ensure the stand and screens fit comfortably.
What the Supplied Information Leaves Open
The catalog confirms that side arms are available to upgrade the dual stand to triple, but it does not specify the cost, part number, or installation procedure for those arms. It also does not provide a maximum weight capacity per monitor arm or the exact number of side arms needed (one or two). For these details, refer to Trak Racer's product support or your stand's manual.
Despite these gaps, the upgrade path is clearly intentional. If you are building a new sim racing setup and want the option to go triple later, the Trak Racer Freestanding Dual Monitor Stand gives you that flexibility without starting over.


