TR5 Accessory Kit Setup: Casters, Drink Holder & Headphone Hook

Start with the kit, not the tools

The TR5 accessory kit bundles three upgrades that solve different daily problems: caster wheels for moving the rig, a drink holder for keeping hydration within reach, and a headphone hook for getting cans off the cockpit. Because they ship together, the install is less about complex disassembly and more about planning where each piece goes before you commit.

Before touching a bolt, unbox everything and check that all three components are present. The catalog lists the kit as caster wheels, a drink holder, and a headphone hook for the TR5 racing simulator, aimed at improving mobility, comfort, and everyday convenience for sim racing, driving simulation, and flight simulation. If any piece is missing, stop and contact the retailer before mounting anything.

Plan mounting points for each accessory

Caster wheels change how the rig sits on the floor, so decide first whether you want the rig to roll freely or stay put during races. The kit is designed for the TR5, but the catalog does not specify caster diameter, locking mechanism, or load rating. Check the wheels against your floor surface and your rig’s weight before installing; if the kit lacks locking casters, plan a chock or a fixed position for serious laps.

For the drink holder and headphone hook, choose locations that do not interfere with your wheel, pedals, or monitor line of sight. The drink holder should sit where you can reach it without brushing the wheel rim. The headphone hook should be within arm’s reach but away from moving parts. Because the catalog does not list clamp sizes or mounting hardware, test-fit each piece in your intended spot before tightening anything.

What the TR5 accessory kit includes

• Accessory Kit for TR5 – Caster Wheels, Drink Holder & Headphone Hook: Accessory Kit – Caster Wheels, Drink Holder & Headphone Hook for TR5 Racing Simulator. Confirms the three components you are installing and that the kit is intended for the TR5 rig.

  

• Accessory Kit for TR5 – Caster Wheels, Drink Holder & Headphone Hook: Designed to enhance mobility, comfort, and everyday convenience for sim racing, driving simulation, and flight simulation enthusiasts. Sets expectations: the kit is a convenience upgrade, not a performance part, so plan the install around daily use.
• Accessory Kit for TR5 – Caster Wheels, Drink Holder & Headphone Hook: Catalog price USD 34.30, comparison price USD 49.00. Helps you judge whether the bundle is worth it versus buying separate accessories, though the catalog does not break down individual prices.

Step-by-step install order

1. 1. Fit the caster wheels first: With the rig empty and unplugged, tilt or raise one side at a time and install the casters according to the kit’s hardware. The catalog does not specify a mounting pattern, so follow any included instructions. Check that all wheels sit flush and spin freely before lowering the rig.
2. 2. Test mobility and stability: Roll the rig a short distance on your floor. If the casters are non-locking, note that the rig may move during heavy braking or wheel force feedback. Decide whether you need a fixed position or additional chocks; the kit description does not mention locks, so verify before relying on them.
3. 3. Mount the drink holder: Choose a spot on the rig’s frame or side where a cup won’t tip into electronics or your lap. The catalog does not list a clamp range or cup diameter, so test with your usual bottle or cup. Tighten the holder so it stays put but can be removed later.
4. 4. Attach the headphone hook: Pick a location that keeps the headphone cable clear of the wheel and pedals. The hook should hold the headband securely without stretching it. Again, check the fit against your specific headphones before final tightening.
5. 5. Final check: Roll the rig, sit in it, and reach for the drink holder and headphone hook. Make sure nothing blocks your view or controls. Re-tighten any hardware that shifted during the test.

Trade-offs to weigh before you install

The biggest unknown is caster quality. The catalog does not state whether the wheels lock or how much weight they support. If you race with strong force feedback or motion, non-locking casters can let the rig creep. In that case, consider using the casters only for moving the rig into position and then securing it with your existing leveling feet or chocks.

The drink holder and headphone hook are convenience items, but placement matters more than hardware. A holder that forces you to twist away from the wheel defeats the purpose. Similarly, a hook that puts your headphones in the path of a moving seat or monitor arm can lead to drops. Take five minutes to mock up each location with tape before drilling or clamping.

At USD 34.30 (compared with a USD 49.00 comparison price), the kit is positioned as a low-cost bundle. The catalog does not break down what each piece would cost separately, so compare against your own needs: if you already have a headphone hook, the bundle’s value depends on how much you want the casters and drink holder.

Common questions about the TR5 accessory kit

Do the caster wheels lock?

The catalog does not specify whether the caster wheels include a locking mechanism. Check the product packaging or contact the retailer before relying on them to hold the rig still during racing.

Will the drink holder fit my bottle?

The catalog does not list a cup diameter or clamp range. Test-fit your usual bottle or cup before mounting, and choose a location where a spill would not reach electronics.

Can I install the kit without drilling?

The catalog does not describe the mounting hardware or whether drilling is required. Inspect the kit contents first; if clamps are included, you may be able to mount without drilling, but confirm before modifying your rig.

Is the kit compatible with other sim rigs?

The product name specifies the TR5 racing simulator. The catalog does not claim universal compatibility, so treat it as TR5-specific unless the retailer confirms otherwise.