How to Install HOTAS Flight Sim Mounts on Your Rig

By Racing Simulators - World's Best Sim Rigs | Published: 2026-10-26

Category: How-to Guides

Learn step-by-step how to install HOTAS flight sim mounts on your RS6 or TR8 Pro rig, with common mistakes and checkpoints to ensure a secure, adjustable setup.

Quick Answer

Install HOTAS flight sim mounts by aligning them with the rig's aluminum profile, securing them with T-nuts and bolts, and adjusting the angle and height to match your seating position. Always check for stability before mounting your controls.

Why Proper Installation Matters

A secure HOTAS mount is essential for precise control and comfort during long flight sessions. Loose mounts can shift under input, causing misalignment and frustration. Proper installation also prevents damage to your rig and equipment.

The Trak Racer Dual Flight Sim Mount for RS6 and TR8 Pro is designed to integrate seamlessly with these cockpits, but the installation process requires attention to detail to achieve optimal stability and adjustability.

Tools and Preparation

Before you start, gather the necessary tools: a hex key set, a torque wrench (optional), and a spirit level. Ensure your rig is on a flat surface and that you have clear access to the mounting points.

Check the mounting hardware included with your HOTAS mount. Confirm that all bolts, T-nuts, and washers are present. If any parts are missing, contact the manufacturer before proceeding.

Step-by-Step Installation Process

Step 1: Position the Mount: Place the HOTAS mount against the side of the rig's aluminum profile where you want the controls. Ensure the mounting brackets align with the T-slot channels. Check that the mount is level and that the brackets are parallel to the profile before tightening.
Step 2: Insert T-nuts and Bolts: Slide T-nuts into the profile channels, then insert bolts through the mount's bracket holes and thread them into the T-nuts. Do not fully tighten yet. Common mistake: using the wrong size T-nut. Verify the profile slot width before inserting.
Step 3: Adjust Height and Angle: With the bolts loose, slide the mount up or down to your preferred height and rotate the bracket to set the angle. The mount should be comfortable for your arm position. Takeaway: Sit in your normal driving/flight position and test the reach before tightening.
Step 4: Tighten All Bolts: Use a hex key to tighten all bolts evenly. Avoid over-tightening, which can strip threads or damage the profile. Apply moderate pressure until snug. Checkpoint: Ensure the mount does not move when you apply pressure. If it shifts, retighten.
Step 5: Mount Your HOTAS Controls: Attach your joystick and throttle to the mount's mounting plate using the provided screws. Ensure they are centered and securely fastened. Common mistake: mounting controls too close to the edge, causing instability. Center them on the plate.
Step 6: Final Stability Test: Gently apply force to the controls in all directions. The mount should remain rigid. If there is any flex, recheck alignment and bolt tightness. Takeaway: A stable mount prevents input errors and enhances immersion.

Recommended Product

HOTAS Flight Sim Mounts for RS6 and TR8 PRO Simulators – Left and Right Side: The Trak Racer Dual Flight Sim Mount is engineered for serious flight sim enthusiasts, providing a stable and adjustable platform for TR8 Pro and RS6 cockpits. This mount is specifically designed to match the profile of your rig, ensuring a precise fit and reliable performance without the need for custom modifications.
HOTAS Flight Sim Mounts for RS6 and TR8 PRO Simulators – Left and Right Side