What This Bracket Set Does
The Trak Racer Adjustable Seat Bracket Set is a universal mounting solution for reclining seats, office chairs, and car seats. It attaches to the base of the seat and to your sim rig frame, allowing you to adjust the seat angle and position. This guide walks through the installation steps using the supplied catalog information, focusing on the fit checks that matter most.
Catalog Facts That Shape Installation
- Universal Adjustable Seat Bracket Set for Reclining Seats & Office Chairs: Bottom mount compatibility: fits reclining seats and office chairs with mounting points between 138mm and 350mm. You must measure the distance between the mounting holes on your seat base. If it falls outside this range, the bracket set will not attach securely.

Universal Adjustable Seat Bracket Set for Reclining Seats & Office Chairs - Universal Adjustable Seat Bracket Set for Reclining Seats & Office Chairs: Top mount compatibility: attaches to seat sliders and sim rig frames with mounting points between 131mm and 291mm. The bracket connects to your rig's seat slider or frame. Measure the spacing on your rig to confirm it falls within this range.
- Universal Adjustable Seat Bracket Set for Reclining Seats & Office Chairs: Compatible with all Trak Racer cockpits (TR120, TR80, TR160, Flight Simulator series) and other leading sim rigs. If you own a Trak Racer rig, the bracket is designed to fit. For other brands, it likely works but you should verify the mounting dimensions.
Tools and Preparation
Before you begin, gather these items:
- Measuring tape or ruler: To check mounting point distances on your seat and rig.
- Socket set or wrenches: For tightening bolts. The bracket uses standard metric hardware; check the included bolts for size.
- Your reclining seat and sim rig: Ensure the seat is removed from any previous mount and the rig frame is accessible.
Installation Steps
Follow these steps in order. If any dimension is out of range, stop and confirm compatibility before proceeding.
- Measure the seat's bottom mounting points: Place your reclining seat on a flat surface. Measure the distance between the centers of the two mounting holes on the bottom. This must be between 138mm and 350mm.
- Measure the rig's top mounting points: On your sim rig frame or seat slider, measure the distance between the mounting holes where the bracket will attach. This must be between 131mm and 291mm.
- Attach the brackets to the seat: Align the bracket's bottom holes with the seat's mounting points. Insert bolts and tighten them to a snug fit. Do not fully torque yet.
- Attach the brackets to the rig: Position the seat with brackets onto the rig's slider or frame. Align the top holes and insert bolts. Tighten all bolts fully.
- Adjust the seat angle: Use the patented recline adjustment system to fine-tune the seat position. Test the range of motion and lock it at your preferred angle.
- Final check: Ensure all bolts are tight and the seat is secure. Rock the seat gently to confirm no movement. If your seat is not listed as compatible, contact Trak Racer.
What the Supplied Information Leaves Open
The catalog does not specify exact bolt sizes, torque values, or step-by-step tightening sequences. Use common hardware practices: tighten in a cross pattern if using multiple bolts, and avoid overtightening. If your seat or rig is not explicitly listed, measure carefully and contact Trak Racer for compatibility confirmation.


