Back to Blog
How-to Guides 2026-11-17 Racing Simulators - World's Best Sim Rigs 6 views

PC Shelf Mount for TR8 PRO, TRX and Porsche 91XTR: Fit Guide

PC Shelf Mount for TR8 PRO, TRX and Porsche 91XTR: Fit Guide

Learn how the Trak Racer PC Shelf mounts to TR8 PRO, TRX and Porsche 91XTR cockpits, what it holds, and the fit checks to make before you bolt it on.

What the PC Shelf is designed to do

The Trak Racer PC Shelf is a bolt-on mount that attaches directly to a Trak Racer tube frame cockpit, holding your gaming PC off the floor and within reach of your rig. It is purpose-built for the TR8 PRO, TRX, Carbon Fibre TRX and the Porsche 91XTR Hybrid Racing Simulator, so if you already run one of those frames, the shelf is a direct fit rather than a universal bracket you have to adapt.

The shelf is made from rigid, vibration-resistant steel and is intended to keep a PC stable during heavy braking and high-speed cornering. That matters because a tower that shifts or rattles under load can distract you mid-stint or, worse, work its way loose over time.

Catalog facts behind the fit

A practical order for fitting the shelf

These steps follow the supplied product information. Where the record does not specify a torque value, bolt size or exact mounting position, check your rig's own assembly documentation before tightening anything.

  1. Confirm your cockpit is on the compatibility list: The shelf is built for TR8 PRO, TRX, Carbon Fibre TRX and the Porsche 91XTR Hybrid. If your frame is not listed, contact Trak Racer to confirm compatibility before ordering.
  2. Check your PC tower against the shelf plate: If your tower is larger than the plate, plan to use the built-in strap slots. Straps are recommended but not included, so source them before installation if you need them.
  3. Bolt the shelf to the tube frame: The shelf attaches directly to the cockpit's tube frame. Follow your rig's assembly guidance for bolt placement and tightening.
  4. Route cables with slack: Cables and electronics are not included with the shelf. Leave enough slack for your rig's movement and keep cables clear of moving parts.
  5. Secure the tower and test stability: If using straps, fit them through the built-in slots and check the tower does not shift during braking or cornering. Trak Racer notes it takes no responsibility for damage to personal equipment while using the product, so secure your PC carefully.

Where the shelf sits in your rig layout

A cockpit-mounted PC shelf keeps the tower off the floor and within the footprint of your rig, which is useful in a home sim racing studio or a commercial simulator centre where floor space is tight. The shelf is also aimed at flight simulator control PCs and esports or streaming setups running titles like iRacing, Assetto Corsa Competizione, Le Mans Ultimate and Microsoft Flight Simulator.

Because the shelf bolts to the tube frame, the PC moves with the rig rather than sitting separately on the floor. That can simplify cable management, but it also means the tower is exposed to the same vibrations as the cockpit. The steel construction and strap slots are there to manage that, but they do not replace careful cable routing and a secure tower.

Shelf plate vs strap slots: which holds your tower

The shelf gives you two ways to secure a PC, depending on the size of your tower.

  • Shelf plate alone: Suitable when your PC tower fits within the plate dimensions. The supplied information does not list the plate dimensions, so measure your tower and compare against the product before ordering.
  • Shelf plate plus straps: Recommended when your tower is larger than the plate. The built-in slots accept PC straps (not included), letting you secure a bigger tower with more confidence.

What the supplied information leaves open

The catalog record does not list the shelf's exact plate dimensions, weight limit or the specific bolt sizes and torque values for installation. It also does not confirm compatibility with Trak Racer frames outside the TR8 PRO, TRX, Carbon Fibre TRX and Porsche 91XTR Hybrid. If you need those details, check with Trak Racer before you buy or install.

The shelf is backed by a Trak Racer 5 Year Replacement Warranty covering manufacturing and hardware durability faults under normal residential use. That covers the shelf itself, not the PC or other equipment mounted on it.

Related Articles

Customer Service
Home
Products
Cart
Profile